DScaler

[nikolastb]

Problems:
- Auto-detect not working,
- no tuner found
- Dont work properly
How I can resolve this problems. Please HELP ME.
THANKS
V-Stream Studio Terminator, TV tuner, teletext & FM & remote, MPEG4, Philips SAA7131E chip, PCI

[Unnamed]

4.1.x project is completely dead? Or i can post regspy data to support my Behold TV 407 FM? I want DScaler to work with it! His native software doesn't have good working deinterlace, I can't live without it...

[Unnamed]

I tried to configure saa713x.ini with regspy and TV-tuner mode now works ok but picture is dark.

[[EsTeWroK]]

I HAVE THE CHIP SAA7130... THIS TV DEVICE IS "PCTRONIX"... THE TUNER WORKS ON COMPOSITE... COMPOSITE DONT EXIST... S-VIDEO WORKS WELL... BUT THE RADIO DONT EXIST...

PLEASE HELP ME...


[EsTeWroK]

[Omega_Nemesis28]

I read the FAQs and it says it doesn't support ATI TV All-In-Wonder.

Is there an updated version that supports it?

[asl]

I am a newbie in using 7134 card & Dscaler. The card is working perfectly with K!TV.

My configuration is Asus TV/FM 7134 with driver 2.3.1.4, Dscaler 4.1.12. The sources of video & audio are setup and working properly.

But, I can see a portion of the video only. No matter using the arrow keys to alter the Y/X center values, at all times I can see part of the video only. But, very strange enough, I can take still picture in full size.

Same problem persists in using Dscaler 4.1.8 and 4.1.11.

How can I rectify the problem???

[Felix]

hi Asl, change backbuffers in the advanced settings to 0, you must have an SIS graphic chip (onboard). Or download an SIS UVGA driver which can display 1450+1050 (which your chip can't display) and move the now virtually 1450*1050 display and then the image is there in full. (search my old posts if you want to do that for a more detailed description)
_________________
dscaler 4.1.15
Typhoon PCI Capture Card Philips (Art 50673)
Athlon XP@220*10Mhz
512MB Ram (400Mhz, CL3 - 64MB reserved for onboardgraphics)
Asrock SIS 741GX flashed to 741 with 1.03EH performance bios

[asl]

You are a master! I forgot to mention I am using SIS onboard graphic chip, but your guess is correct!!!

I followed your instructions and the problem is solved then. Dscaler is working perfectly now.

Thanks so much

[Felix]

Question: which of the following cards are supported by dscaler, help didn't really sort it out?
Anubis Typhoon TV Tuner Card RDS Philips PCI (50673)
= 25€
(it has the SAA7134 chip, tuner may be phillips ???

or
ADS Technologies Instant TV PCI (PTV-350) I believe it has tda8290 as tuner.
33€
http://www.dscaler.org/phpBB/viewtopic.php?t=3949&highlight=ads+instant
So I'm not sure if it actually works with sound (don't want to be the first one as with the PCTV STEREO)

which of the two works? and which one is better, as there are no real datasheets on the net, or is SAA7134 allways the same quality irrespectively of the tuner?
P.S: My PCTV Stereo doesn't give me any sound any more, so I would prefer another cheap card, but one that hopefully doesn't suffer the same sound problems as my shitty pinnacle. (It doesn't work anymore not depending on software - I must admit that tuning the cooling possibilities can not have done any good. But lets try somethin else!
Otherwise I will try another PCTV STEREO it's as well 25€, I can't return mine cause there are so many upgrades on it (for the heatsinks).
_________________
dscaler 4.1.15
Typhoon PCI Capture Card Philips (Art 50673)
Athlon XP@220*10Mhz
512MB Ram (400Mhz, CL3 - 64MB reserved for onboardgraphics)
Asrock SIS 741GX flashed to 741 with 1.03EH performance bios

[Cricri]

The ADS Tech Instant TV PCI has got a philips chipset SAA 7135 HL
The audio flux is internal, but there is also a line out plug, so no problem
Personnally I did not suceed in making working with DScaler using DScaler drivers ... only in WDM, it does not mean it can not work, I am not very handy with DScaler

Just in case, I have made a girder plugin for the remot of this card, it is only half way working because I have som duplicate key, but it helps

Finally I have now a Pinnacle 310i hybrid analog and DVB-t for the TNT, but I did not succeed more with DScaler for the analog part ...
But globally this card has a better quality in analog.

[Felix]

Thanks cricri, so if that one doesn't work with dscaler drivers I now only need someone to tell me about the Anubis Typhon, which at least for a start got an SAA7134 chip.
_________________
dscaler 4.1.15
Typhoon PCI Capture Card Philips (Art 50673)
Athlon XP@220*10Mhz
512MB Ram (400Mhz, CL3 - 64MB reserved for onboardgraphics)
Asrock SIS 741GX flashed to 741 with 1.03EH performance bios

[Cricri]

Maybe you can try to add this card caracteristics in the INI file, I remember having tried that with the ADS, but I only succeed in having a picture in black & white, so it may work ...
I will try to make tests with the Pinnacle as I do not have the ADS installed anymore ...

[Felix]

I found this text about the Anubis card on a linux-Kernel Page, if it uses the flyvideo3000 driver, does this mean it works with dscaler?:

http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-01/3942.html
driver_data = SAA7134_BOARD_FLYVIDEO3000,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
+ .device = PCI_DEVICE_ID_PHILIPS_SAA7134,
+ .subvendor = 0x4e42, //"Typhoon PCI Capture TV Card" Art.No. 50673
+ .subdevice = 0x0138,
+ .driver_data = SAA7134_BOARD_FLYVIDEO3000,
+ },{
+ .vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7130,
.subvendor = 0x5168,
.subdevice = 0x0138,
@@ -648,11 +957,35 @@
.subdevice = 0x4830,
_________________
dscaler 4.1.15
Typhoon PCI Capture Card Philips (Art 50673)
Athlon XP@220*10Mhz
512MB Ram (400Mhz, CL3 - 64MB reserved for onboardgraphics)
Asrock SIS 741GX flashed to 741 with 1.03EH performance bios

[Felix]

And here is the bttv info on it, does it look good?http://pvrhw.goldfish.org/bttv/bttv-gallery.html
LR138 REV:H (here: Typhoon PCI Capture TV Card, Art.No. 50673)

chips: saa7134hl, mdt2005es, hef4052bt, a21sc, xtal 24.576b, xtal4
tuner: TCL2002MB-3
connectors: TV Ant, Video in(yellow), audio in (blue), S-Video In(4pol),Audio out(green), R/M
pcb: LR138 REV:H, Made in Taiwan

00:11.0 Multimedia controller: Philips Semiconductors: Unknown device 7134 (rev 01)
Subsystem: Unknown device 4e42:0138
saa7134[0]: board init: gpio is 38500


Later: saa7134[0]: board init: gpio is 34500
and: saa7134[0]: board init: gpio is 30500

# detect
0xa0: eeprom
0xc2: tuner
# eeprom
0000 42 4e 38 01 10 28 ff ff ff ff ff ff ff ff ff ff BN8.............
0010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0030 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0040 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0050 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0060 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0080 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
0090 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00a0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00b0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00c0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00d0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00e0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
00f0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................


from INF:
[Philips]
%Fly2100.DeviceDesc% = LVCap138E.Device, PCI\VEN_1131&DEV_7130&SUBSYS_01364E42
%FlyDV2000.DeviceDesc% = LVCap138E.Device, PCI\VEN_1131&DEV_7130&SUBSYS_01374E42
%Fly2000.DeviceDesc% = LVCap138E.Device, PCI\VEN_1131&DEV_7130&SUBSYS_01384E42

%Fly3100P.DeviceDesc% = LVCap138EA.Device, PCI\VEN_1131&DEV_7134&SUBSYS_01364E42
%FlyDV3000P.DeviceDesc% = LVCap138EA.Device, PCI\VEN_1131&DEV_7134&SUBSYS_01374E42
%Fly3000P.DeviceDesc% = LVCap138EA.Device, PCI\VEN_1131&DEV_7134&SUBSYS_01384E42

%Fly3100N.DeviceDesc% = LVCap138ES.Device, PCI\VEN_1131&DEV_7133&SUBSYS_01364E42
%FlyDV3000N.DeviceDesc% = LVCap138ES.Device, PCI\VEN_1131&DEV_7133&SUBSYS_01374E42
%Fly3000N.DeviceDesc% = LVCap138ES.Device, PCI\VEN_1131&DEV_7133&SUBSYS_01384E42

%miniPCITVCard% = LVCap138ES.Device, PCI\VEN_1131&DEV_7130&SUBSYS_02101043
%miniPCITVCard% = LVCap138ES.Device, PCI\VEN_1131&DEV_7133&SUBSYS_02101043
%miniPCITVCard% = LVCap138ES.Device, PCI\VEN_1131&DEV_7134&SUBSYS_02101043
Fly2100.DeviceDesc = "TV Card 7130 LP"
FlyDV2000.DeviceDesc = "DV Card 7130"
Fly2000.DeviceDesc = "TV Card 7130"

Fly3100P.DeviceDesc = "TV Card 7134 LP"
FlyDV3000P.DeviceDesc = "DV Card 7134"
Fly3000P.DeviceDesc = "TV Card 7134"

Fly3100N.DeviceDesc = "TV Card 7133 LP"
FlyDV3000N.DeviceDesc = "DV Card 7133"
Fly3000N.DeviceDesc = "TV Card 7133"

miniPCITVCard = "MiniPCI TV CARD"

.tw website 12/2003:
FlyTV Prime 30 LR138 SAA7130 MONO Standard
FlyTV Prime 30 LP LR136 SAA7130 MONO Low Profile

FlyTV Prime 30, 33, 34 (optional with FM),
FlyTV Prime 30LP,34LP: LR136 (low profile), optional with FM
FlyDV Prime 30,33,34 (optional with FM)
FlyTV Platinum 33, 34,35 (LR214S, LR214A, LR214W), philips silicon tuner
FlyTV Platinum mini (LR212 Mini-PCI), saa7135: BTSC, EIAJ, NICAM, A2
30 series: SAA7130: Mono TV
33 series: SAA7133: MTS, Bilingual for USA / Japan
34 series: SAA7134: NICAM,A2 Stereo for PAL
35 series: worldwide stereo

Supported tuner types:
Versatile TV tuner type: NTSC, PAL BG, PAL DK, PAL I, SECAM LL'
2-in-1 TV tuner type: PAL BG+DK, PAL DK+I
Pan-European 4-in-1: PAL BG+ DK+ I+ SECAM LL'

.us website 12/2003:
Flyvideo2000: tv mono (LR138)
Flyvideo3000: tv stereo
also available with FM
2xxx serial saa7130
3xxx series: available as 7133(us,jp) or 7134(europe)
Flyvideo DV2000/DV3000=: with fire wire port (LR137)

Flyvideo 2100,3100: low profile, internal connectors, for OEM (LR136)
_________________
dscaler 4.1.15
Typhoon PCI Capture Card Philips (Art 50673)
Athlon XP@220*10Mhz
512MB Ram (400Mhz, CL3 - 64MB reserved for onboardgraphics)
Asrock SIS 741GX flashed to 741 with 1.03EH performance bios

[ngsebastian]

Hello, I just buied my TV Tuner and it is a V-Stream Creator TV-MCE 100 Pro, and the dscaler does not recognize my tuner some things that DScaler shows me are

Video Decoder: SAA7133
Vendor ID: 1131
Autodetect ID: 713517DE
Device ID: 7133

I use Dscaler 4.1.12 Can I do something to use DScaler with my TV Tuner?

Thank you